New Products | Multi-Channel In-vehicle Ethernet Emulation Test Tool

New Product Release

With the rapid development of automotive electronics technology, in-vehicle Ethernet simulation and test tools are widely and importantly used in the automotive industry. They are mainly used to test, verify and optimize the performance, reliability and compatibility of in-vehicle Ethernet systems.TOSUN re-launched multi-channel in-vehicle Ethernet/CAN FD/LIN simulation test tool-TC1054Pro products to help the industry process.

Products

TC1054 Pro is a multi-channel in-vehicle Ethernet/CAN FD/LIN bus test equipment launched by TOSUN, which connects to PC via 10Gb Ethernet or 1000Base-T or USB3.0 interface, and realizes network analysis, simulation, testing, verification, as well as DoIP, SOME/IP, etc. through TSMaster software.

typical application

Vehicle Ethernet Residual Bus Simulation
In-vehicle Ethernet data monitoring and parsing
In-vehicle Ethernet communication testing
ECU flashing (UDS or DoIP based)
ECU-level and system-level automated testing
Automotive Ethernet to CAN FD Gateway Application

Functional Features

us (microsecond) level hardware message timestamp;
Drive-free design for Windows 10/11/7 systems;
4-channel 100/1000Base-T1, which can be switched and selected at any time via software;
4-way CAN FD/CAN, 2-way LIN;
In-vehicle Ethernet interface form: TE MATEnet or via cable to Rosenberger H-MTD;
LEDs indicate the status of on-board/standard Ethernet operation;
LEDs show system operating status, including rate, Master/Slave and USB status indication;
Automotive-grade design supports loading ARXML files in TSMaster to parse in-vehicle Ethernet messages;
DoIP support;
SOME/IP support;
CAN channel DC2500V isolation;
CAN FD channel baud rate 125Kbps-8Mbps adjustable;
The LIN bus master and slave nodes are software configurable;
Database files such as LDF, DBC, ARXML, etc. are supported through TSMaster software;
Supports BLF and ASC format data logging and offline/online playback;
The CAN's built-in 120 ohm termination resistor is software configurable;
UDS diagnostics and Flash Bootloader with CAN FD/CAN/LIN support;
Equipped with Windows secondary development API interface, supports Ethernet message RAW format receive, send and send completion events with timestamp, and supports modification of message CRC;
Provide sample projects based on API interfaces to facilitate secondary development;
Supports hardware time synchronization between multiple devices;
Supports digital IO*4/AIAO*3;
Operating Temperature Range: -40℃~80℃

Technical parameters

Name
Basic parameters
Passage	4 x 100/1000Base-T1 2 x LIN 4 x CAN FD
PC interface	10Gb Ethernet/1000Base-T/USB3.0
T1 interface	TE MATEnet or switching to Rosenberg H-MTD over cable
Drive	Drive-free design for Windows 10/11/7 systems
Timestamp accuracy	Hardware message timestamps at the us (microsecond) level
T1 isolation method	capacitive isolation
CAN	Supports CAN2.0A and B protocols, conforms to ISO11898-1 specification, baud rate 125Kbps-1Mbps
CAN FD	Supports ISO and non-ISO standard CAN FD at baud rates of 125Kbps-8Mbps